RG11 Coax Cable for Indoor CATV CCTV System

Home/RG11 Coaxial Cable/RG11 Coax Cable for Indoor CATV CCTV System
RG11 Coax Cable for Indoor CATV CCTV System 2017-12-13T08:58:29+00:00

Project Description

Quick details:

  • High quality bare copper inner conductor
  • Virgin grade PE insulation
  • Quad-shield
  • PVC jacket with steel messenger
  • Good electrical performance
  • User’s label design service is available

Product description:

Solid copper as inner conductor, dielectric core is insulating grade virgin polyethylene. Bonded laminated aluminum tape, 60% Aluminum wire braid, laminated aluminum tape, 40% aluminum wire braid, PVC jacket.

Center conductor:

14AWG copper clad steel

Nominal diameter: 1.63mm+/-0.01mm (0.064 inches)


Gas expanded polyethylene

Nominal diameter over dielectric: 7.11mm+/-0.13mm(0.28 inches)


1st shield: bonded aluminum tape.

2nd shield: 0.16 aluminum braid wires, 6ends x16 carry with 60% coverage.

3rd shield: laminated aluminum foil.

4th shield: 0.16 aluminum wire, 4 ends x 16 carry with 40% coverage

PVC Jacket:

Nominal diameter over jacket:10.34mm+/-0.25mm(0.407 inches)

Messenger version: 1.3mm or 1.83mm zinc coated (galvanized) carbon steel wire.

Characteristic Impedance 75±3Ohm
Capacitance 52±1pF/m
Velocity >82%
Insulation resistance 1000MΩ(20℃)
Frequence (at 20℃) Max.Attenuation
5MHz 1.25dB/100m
55MHz 3.15dB/100m
83MHz 3.87dB/100m
211MHz 6.23dB/100m
300MHz 7.38dB/100m
350MHz 7.94dB/100m
400MHz 8.53dB/100m
450MHz 9.02dB/100m
550MHz 9.97dB/100m
750MHz 11.97dB/100m
865MHz 13.05dB/100m
1000MHz 14.27dB/100m